Remote CCTV Remote Video    VitalPoint®    Remote CCTV Remote Video

                    Big Screen Network Video Server for
                           LAN's/WAN's and the Internet

              Front View

    Rear Panel

        VitalPoint’s network video server for LAN’s, WAN’s and the Internet.

 The “NetCCTV” network video server is a true real-time multi-processor server. This unit can handle from 1 camera up to a total of 32 cameras utilizing four, 8 port camera expansion units. The NetCCTV unit uses the standard’s base TCP/IP protocol and can be attached to any Ethernet network with an RJ45 connection.

 Using our secure encryption protected GUI (general user interface) the user may watch real-time video with no danger of Web/Internet based virus or unwanted vendor cookies getting transmitted to the viewing station through their web browser.

 The NetCCTV video server supports a range of CCTV cameras (Composite Video Cameras) including (NTSC or PAL Video formats). The following Image frames sizes are supported (VGA and or CIF with clear pictures up to1600 x 1200 display resolution).

 Support for LAN’s/WAN’s Internet, Cable broadband modems and xDSL are standard. The NetCCTV unit utilizes a 10/100 Megabit Ethernet interface. This device must have its own unique TCP/IP address.

Ethernet LAN's, cable modems and xDSL are growing in large cities and potentially will extend everywhere phone systems now exist. Cable modem or xDSL come into the home or office. A modem box/router or gateway splits the incoming signal and converts it to a standard 10 Megabit Ethernet LAN interface using TCP/IP as the protocol. Using a standard multiport-hub port, the "NetCCTV" LAN server can be connected to your network. The NetCCTV network interface is 10/100mb. The NetCCTV LAN Server gets power through an AC adapter that is plugged into a wall outlet and through a jack to the NetCCTV network video server. Wiring is very simple.

Frame rates will depend on available bandwidth, frame size and number of camera's viewed. This product’s target market is on corporate observation systems using network technology. The purpose of this product is to allow MIS, Security or Operations Managers to view any location from home or office from their monitoring station, desktop or laptop at any time.

To see frame rate please check out our Speed Frame Rate Chart

What you get when you purchase the NetCCTV product Kit.

1.) NetCCTV hardware standalone RISC computer with internal 10/100mb Ethernet interface. There are also additional RS232 ports for configuration and outputs.
2.) NetCCTV application software for Windows 98/2000 and NT to SP.6a.
3.) Ethernet cable with RJ 45 connector to hook up to your LAN or hub.
4.) 4 X 7 ft camera cable's and adapters for conversion from BNC/RCA to RJ 45
5.) NetCCTV Manual
6.) NetCCTV standard Power Supply adapter, this supply will work around the globe.

The kit does not include camera's please call for information on camera's available

Warning

The "NetCCTV" application program which comes on a CD will run under Windows 98, Windows 2000 or Windows NT. Windows 95 is not supported with this unit. If you require a remote video unit to work on Windows 95 we suggest our PhoneHub Product

Sales brochures

Click above for NetCCTV sales brochure, adobe acrobat reader required.

Camera expansion unit

The camera expansion unit supports 1-8 CCTV camera's. You can use up to 4 camera expansion units per master unit. This product works with all our other models of master units.

Contact Information

Sales inquiries    USA 1-401-885-7785     Eastern time USA
General sales information: rwixted@vitalpoint.com

Copyright© 1997-2003 VitalPoint, Inc. All trade marks are the property of their respective owners.